Wednesday, December 21, 2011

R33 GT-R Update: R34 GT-R Steering Wheel Swap

Not many people know this but R34 GT-R steering wheels are plug & play when it comes to Series II / late model R33 GT-Rs. Airbang and all mind you, with no error lights showing.


Now theres nothing wrong with the stock R33 GT-R quad steering wheel. Its just that it doesn't have much character going for it. I mean, it only has an embossed 'Nissan' on the horn button, along with the corresponding moon corporate logo and outer red leather stiching. It was also present in the Silvia S14 and other Nissan models like the Skyline GTST (ENR33 / ER33). No offence to the owners of those cars but I wanted a steering wheel that had a tad bit more GT-R exclusivity. Nissan must have really liked the design by the way, because it was still in use in their first generation X-Trail! Ahh, you've served me well old girl...


I've always been a fan of the R34 GT-R steering wheel, mainly because of the tri-star sculpted design and the prominent 'GT-R' horn logo. It's also smaller by an inch or so in terms of diameter. No prizes for guessing where I managed to source a unit (thanks to my good buddy Eu-Jin at JDM Auto Link). Supposedly, these are quite rare and difficult to source.


It was a pretty straight forward affair in removing the stock steering wheel. I knew that the airbags in the two steering wheels were of the same model, but there was no harm in checking. To do this, the side latches were opened up and the airbag housing unscrewed. Fortunately, the sockets all matched up, so we were good to go. Do note that this modification is only possible in Series II / late model R33 GT-R's, that feature driver and passenger side airbags. If you have an older BCNR33, then you're unfortunately out of luck. This is confirmed for Series I R33 GT-Rs. Oh and did you know that airbags have a shelf life? The one in my stock R33 GT-R steering wheel has clearly gone pass it's expiry date (circa 1997!), while I'm hoping the R34 GT-R's airbag is still good for a couple more years. Food for thought, gentle people.


Now all that was left to do was to line up the R34 GT-R steering wheel and bolt it in. I have to say that due to the tri-star design, the steering wheel feels much smaller and more chuckable. I just love it because it's a straight fit (no adaptation needed), looks like it belongs there in the first place, is much smaller than the unit that it replaces and really spruces up my R33's interior. Aki, you should really do this mod, mate ;).

2 comments:

Aki said...

Loki - obviously we think alike, this is a mod I was considering. Did not know that the 34 wheel was smaller by 2cm... so 35cm diameter? That's on par with most aftermarket ones out there! Well if I do this, I guess I will have to do it a bit differently...

Aki

ceravaserawak said...

Loki, just want to ask if u know where can I get front differential gear for bnr34 39:11 ratio. Almost 3month try to find it. Really need help...tq bro